How-to activate my LSS V6/V7 license on 3945N?

ProblemAfter the installation of LSS V6/V7, it requires activation. How can I perform it?

SolutionIn order to use the LSS V6/V7 product for more than 30 days you will need to activate. There are two methods to perform this:

1. Online
NOTE: Using “Online” method requires to provide Internet access for the 3945N LSS V6/V7.

In order to activate the product online access the GUI located in “HELP > About Data Storage Software V6/V7”, check the “Online activation” and click “apply”. Application will automatically connect to our server and perform the activation process.
In case of any activation failures, please verify if You meet there requirements :
– open following ports in firewall : 25 and/or 10444
– check if default gateway is set and if it’s correctly (use ping function under console CTRL+ALT+T to check if activation servers: respond)
IP Address of the activation server : or
2. Offline
NOTE: In this case Internet access for the 3945N LSS V6/V7 is not required.
In order to activate the LSS V6/V7 offline access the GUI located in “HELP > About Data Storage Software V6/V7”, check the “Offline activation” and click “download”. Hardware stamp file will be downloaded on you computer. Next step is to send this file to as an attachement (replay with activation file should come with in 7 days).
Activation rules
3045N LSS V6/V7 product license is assigned to your hardware. It is done during the activation process. When you would like to activate your product, the Hardware Stamp file is produced on the basis of your hardware. When you perform this online everything is done automatically, but when you select offline you have to send the Hardware Stamp file to and we will send you back the activation file. After applying the activation file the LSS V6/V7 product is activated. In case you need to replace your hardware (i.e. a part has been faulty) you will need to activate LSS V6/V7 product again but it is limited to the time in relation to the activation. The minimum time is 7 days after the previous activation and only one part of your hardware could be replaced. If you would like to replace additional parts you are not able to activate your product and the only way is to contact support. Please provide as much information when requesting this activation.
Important note!
The Hardware Stamp file is not assigned to the PCI extension cards and RAM memory. It is possible to replace them without the need for re-activation.